For LCD-TV Application
LTE200F-D41 AC/DC Type
 Input Specifications:
- Voltage: 90-264 VAC, full range
- Frequency: auto ranging
- Current: 2.5 arms. max@115VDC 197W load / 1.5 arms. max@230VDC 197Wload
- Inrush Surge Current: < 45AP-P typical, cold start @25°C, 115vac
Output Specifications:
- Output Wattage: 197 watts max. (convection rating)
- Line Regulation: ± 0.5% typical
- Load Regulation: main outputs ± 3%, aux. outputs± 4% typical (note 2)
- Noise & Ripple 1.5-2% Typical At Full Load (note 3)
- Overshoot / Undershoot ±10% Max@Turn-On / Turn-Off
Voltage (Vdc) |
Load Range (A) |
Line Regulation |
Load Regulation (Note 2) |
Ripple & Noise (Note 3) |
Min |
Max |
Peak (N1) |
V1 |
+24V |
0.8A |
8.0A |
8.5A |
±0.5% |
23.28~24.72Vdc
(±3.0%) |
240mVp-p (1%) |
V2 |
+5VSB |
0.8A |
1.0A |
1.2A |
4.85~5.15Vdc
(±3.0%) |
100mVp-p (3%) |
| Note: |
1. |
Peak current lasting < 30 seconds with a maximun 10% duty cycle |
| : |
2. |
Load regulation is tested at min. to 100% of rated load and other outputs are set at 50% of rated load. |
| 3. |
Peak-to-peak for rated load@197W (convection rating) @90Vac min; measurements with a 20MHZ bandwidth and terminated with a 10uF electrolytic cap. in parallel with a 0.1uF ceramic cap. |
|
Environmental:
- Operating Temperature: 0°C to 40°C ambient, derated each output at1.0% per °C from 40°C to 50°C
- Storage Temperature: -40°C to 85°C
- Humidity: operating, non-condensing, 5% to 95%
- Vibration: random operating 2.4 grms/max. 3 axes 50~500hz 10 minutes/axis
- Shock: operating half sine 20 gpk/max. 3 axes 10ms 6 shocks total
General Specifications:
- Efficiency: @115VAC with full load > 82%, and @230VAC with full load > 85%
- Turn-On Time: @115vac with full load < 2 sec
- Hold-Up Time: @115vac with convection rating >16msec
Electromagnetic Compatibility Specifications:
- EMI Conducted / Radiated: FCC part15 & CISPR 22 & EN55022 class B
- Designed To Meet EN61000-3-3,-4-2,-3,-4,-5,-6,-8,-11
- Designed To Meet The Following Standards UL 60950, CUL 60950, TUV EN6090, CB, CE Marked
Connector Types & Pin Assignments:
Connctor Number |
Connector Type |
Pin Number |
Signal |
CON1 (Input) |
JST#B 2P-VH-3 or Equivalent;
Mating Connector¡ x
JST#VHR-3N or Equivalent |
Pin1
Pin2
Pin3
|
L
N
E |
CON2 (Output) |
JST#B 3B-XH-A or Equivalent;
Mating Connector¡ x
JST#XHP-3 or Equivalent |
Pin1
Pin2
Pin3 |
Return
On/Off
+5VSB |
CON3 (Output) |
JST#B 4P-VH or Equivalent;
Mating Connector¡ x
JST#VHR-4N or Equivalent |
Pin1~2
Pin3~4 |
+24V
Rerurn |
Mechanical Specification: I/O Connectors: See Table
|
