LTE 42S-D12

HOME > Product > Switching Mode Power Supply > Other Design Switching Mode Power Supply > LTE 42S-D12

Picture of Switching Mode Power Supply For Model No LTE42S-D12

For Network And Application

LTE42S-D12 AC/DC Switching Power Supplies

Input Specifications:

  • Voltage: 90-264vac, universal
  • Frequency: auto ranging
  • Current:
    1.2 arms. max @115vac 42w load
    0.6 arms. max @230vac 42w load
  • Inrush Surge Current
    < 30a typical, cold start @25°C, 115vac

Output Specifications:

  • Output Wattage: 42 watts max. (convection rating)
  • Line Regulation: ±1.0% typical
  • Load Regulation: main outputs ± 4%, aux. outputs ± 4 % typical (note2)
  • Noise & Ripple: 1.5-2 % typical at full load (note3)
  • Overshoot / undershoot 5% max. @ turn-on / turn-off
Voltage (Vdc)
Load Range (A)
Line Regulation
Load Regulation (Note 1)
Ripple & Noise (Note 2)
Min
Max
Peak (N1)
V1
+5.1V
0A
6.0A
7.0A
±1.0%
4.896~5.304Vdc (±2%)
100mVp-p (2%)
V2
+12V
0A
1.0A
1.2A
10.8~13.8Vdc (-10+15%)
180mVp-p (1.5%)
Note:1.Peak current lasting <30 seconds with a maximum 10% duty cycle @100vac min
2.Cross/Load regulation is tested at 10% to 100% of rated load and other outputs are set at 50% of rated load.
3.Peak-to-peak for 42W (convection rating) @90vac min; measurements with a 20MHZ bandwidth and terminated with a 10uF electrolytic cap. in parallel with a 0.1uF ceramic cap.

Environmental:

  • Operating Temperature: 0°C to 50°C ambient, derated each output at 2.5% per °C from 50°C to 70°C
  • Storage Temperature: -40°C to 85°C
  • Humidity: operating, non-condensing, 5% to 95%
  • Vibration: random operating 2.4 grms/max. 3 axes 50~500hz 10 minutes/axis
  • Shock: operating half sine 20 gpk/max. 3 axes 10ms 6 shocks total

General Specifications:

  • Efficiency: @115vac with full load >73% and @230vac with full load >73%
  • Turn-On Time: @115vac with full load < 2 sec
  • Hold-Up Time: @115vac with convection rating

Electromagnetic Compatibility Specifications:

  • Emi Conducted/Radiated: FCC part15 & CISPR class B
  • Designed to meet EN61000-3-3,-4-2,-3,-4,-5,-6,-8,-11
  • Designed to meet the following standards UL 60950, CUL 60950, TUV EN6090, CB, CE marked

Mechanical Specification: