For Network And Application
LTE22S-T1F1 AC/DC Switching Power Supplies
 Input Specifications:
- Voltage: 90-264 Vac, Universal
- Frequency: Auto Ranging
- Current:
0.7 Arms. Max. @115Vac 22W Load
0.35 Arms. Max. @230Vac 22W Load
- Inrush Surge Current:
< 30AP-P Typical, Cold Start @25¢XC, 115vac
Output Specifications:
- Output Wattage: 22 Watts Max (Convection Rating)
- Line Regulation: ± 1.0% Typical
- Load Regulation: Main Outputs ± 4%, Aux. Outputs ± 4 % Typical (Note2)
- Noise & Ripple: 1 % Typical At Full Load (Note3)
- Overshoot / Undershoot ±10% Max @ Turn-On/ Turn-Of
Voltage (Vdc) | Load Range (A) | Line Regulation | Load Regulation (Note 2) | Ripple & Noise (Note 3) | Min | Max | Peak (N1) | V1 | +5V | 0.2A | 2.0A | 2.3A | ±1.0% | 4.9~5.1Vdc (±2%) | 50mVp-p (1%) | V2 | +48V | 0.01A | 0.25A | 0.3A | -43.2~-52.8Vdc
(±10%) | 480mVp-p
(1%) | V3 | -65V | 0.01A | 0.185A | 0.2A | -58.5~-71.5Vdc
(±10%) | 650mVp-p
(1%) | | Note: | 1. | Peak current lasting <30 seconds with a maximum 10% Duty Cycle. | | 2. | Cross/Load regulation is tested at 10% to 100% of rated load and other outputs are set at 50% of rated load. | | 3. | Peak-to-peak for 22W (convection rating) @100Vac min; measurements with a 20MHZ bandwidth and terminated with a 10uF electrolytic cap. in parallel with a 0.1uF ceramic cap. |
|
Environmental:
- Operating Temperature: 0°C to 40°C ambient, derated each output at 2.5% per °C from 50°C to 70°C
- Storage Temperature: -40°C to 85°C
- Humidity: operating, non-condensing, 5% to 95%
- Vibration: random operating 2.4 grms/max. 3 axes 50~500hz 10 minutes/axis
- Shock: operating half sine 20 gpk/max. 3 axes 10ms 6 shocks total
General Specifications:
- Efficiency: @115vac with full load >77% and @230vac with full load >77%
- Turn-On Time: @115vac with full load < 3 sec
- Hold-Up Time: @115vac with convection rating >16msec
Electromagnetic Compatibility Specifications:
- Emi Conducted/Radiated: FCC part15 & CISPR 22 & EN55022 class B
- Designed to meet EN61000-3-3,-4-2,-3,-4,-5,-6,-8,-11
- Designed to meet the following standards UL 60950, CUL 60950, TUV EN6090, CB, CE marked
Connector Types & Pin Assignments: | Connctor Number | Connector Type | Pin Number | Signal | | J1 (Input) | JST#B 2P-VH-3 or Equivalent (Gold plate) | Pin1
Pin2 | N
L | J2
(Output) | JST#VHR-2N or Equivalent (Gold plate) | Purple
Black | -48V
Return | | JST#VHR-2N or Equivalent (Gold plate) | Gray
Black | -65V
Return | | JST#VHR-4N or Equivalent (Gold plate) | Red
Black | +5.0V
Return |
Mechanical Specification: I/O Connectors: See Table 
|
