LTE 60FS Series 60W Single Output Switching Power
 Input/ Output Specifications:
- VOLTAGE: 100-240 VAC, Universal
- FREQUENCY: 47-63
- CURRENT: 1.5 ARMS. MAX @115 Vac 90W LOAD
- INRUSH SURGE CURRENT: 30A TYPICAL, COLD START@25 Degree, 115Vac
- OUTPUT WATTAGE: 26.4Watts ~ 65Watts MAX (Convection Rating)
- LIND REGULATION: ± 0.5 % Typical
- LOAD REGULTION: Main Outputs ± 5%, Aux Outputs ± 10% Typical (Note1)
- NOISE & RIPPLE: 1 % Typical At Full Load (Note2)
- OVERLOAD / VOLTAGE PROTECTION: TYPICALLY 115 ~ 200% CONTINUOUS HICCUP MODE
| Note: |
1. |
LOAD REGULATION TESTED AT 0 ~100% OIF MAX LOAD |
| 2. |
PEAK-TO-PEAK FOR 26.4W~65W (CONVECTION RATING) @90VAC MIN; MEASUREMENTS WITH A 20MHz BANDWIDTH AND TERMINATED WITH A 10uF ELECTROLYTIC CAP. IN PARALLEL WITH A 0.1uF CERAMIC CAP. |
Environmental:
- OPERATING TEMPERATURE: 0°C TO 50°C AMBIENT, DERATED EACH OUTPUT AT 2.5% PER °C FROM 50°C TO 70°C
- STORAGE TEMPERATURE: -40°C TO 85°C
- HUMIDITY: OPERATING, NON-CONDENSING, 5% TO 95%
- VIBRATION: RANDOM OPERATING 2.4 GRMS/MAX. 3 AXES 50~500Hz 10 MINUTES/AXIS
- SHOCK: OPERATING HALF SINE 20 GPK/MAX. 3 AXES 10mS 6 SHOCKS TOTAL
General Specifications:
- TURN-ON TIME: 3SEC MAX AT FULL LOAD @ 115VAC
- HOLD-UP TIME: 16MS TYPI8CAL AT FULL LOAD @ 115VAC
- MTBF DEMOSTRATED: > 100,000 HOURS AT FULL LOAD AND 25 DEGREE AMBIENT CONDITIONAL
Electromagnetic Compatibility Specifications:
- EMI CONDUCTED/RADIATED: FCC & CISPR CLASS B
- DESIGNED TO MEET EN61000-3-3,-4-2,-3,-4,-5,-6,-8,-11
Connector Type & Pin Assignments
|
